|
|
| We support |  |
Recommended
Accessories
 
"When space and versatility is an issue FEEDBACK SPORTS will have the
answer.! In a small living space a stand that looks as good as works
is a true treasure!"
- Gerry Kichok
FEEDBACK SPORTS 2-Bike Velo Cache Storage Stand buy it for US$139.99
on aspirevelotech.com
Stable Base
Three-leg base (2-bike configuration) holds up to 80 lbs. and four-leg base (4-bike configuration) holds up to 160
lbs.
Sturdy Construction
Quality anodized aluminium column and carefully engineered cradles ensure years of exceptional service.
Adjustable cradle arms
Each pair of arms can be independently height adjusted to hold all types and sizes of bikes, even with sloping top tubes. Soft rubber protects the frame’s finish.
Accessories
Multiple accessories available.
2-Bike VELO CACHE Specifications:
- Height 83” (2108 mm)
- Base footprint 23” x 32.5” (580 mm x 830 mm)
- Support arm length 10” (250 mm)
- Load capacity 80 lbs. / 40 lbs. per cradle set (18 kg per)
- Weight 22.5 lbs. (10.2 kg)
- Shipping weight 30 lbs. (13.6 kg)
- 3-year warranty
|
|
TUFO
tubeless tubular S3 Lite
21mm <215 g
buy it on 
for US$59.95
TUFO
tubeless tubular S3 Lite
19mm <195 g
buy it on
for US$59.95
 These
very unique tires fill the
standard role you'd expect from
an all around road race
tire.
They
do everything very well and
convey the road feel better!
- puncture
proof ply
- protective
rubber ply
- activated
silica tread compound
- size:
28"/700C
- pressure: 8–15
bar (115–220 p.s.i.)
|
TUFO
Extreme Tape buy it
on
for US$24.00
The TUFO Extreme two sided
tubular tire gluing tape is
intended for road races, track,
and triathlon. Suitable for high
climate temperatures.
"I've always used glue and
I've never found it easy to use
and never strong enough to stop
tires from rolling off" ---
UNTIL NOW!
This
tape works, it's an extremely
strong glue and never gave my a
bit of trouble installing my
TUFO tubeless tubular tires. |
 Chris
King Classic front hub buy it for US$149.00
on aspirevelotech.com
Chris King Classic rear hub buy it for US$330.00
on aspirevelotech.com
The ultimate
lightweight, high performance hubs and it's hard to believe
that they are also the toughest hubs out there. The 2008 front hub
weighs an incredible 112g or, for the new high flange hub only136g .
The 2008 rear hubs are available in 130mm axle spacing (road) or
135mm axle spacing (mountain) with either an aluminium drive shell
weighing 264g/266g (road/mountain) or the stainless steel
Heavy-Duty drive shell weighing 344g/346g (road/mountain) .
All rear Classic hubs are Shimano 7,
8, 9 and 10 speed (for 7-speed use 4.5mm spacer available from Chris
King Precision Components). Standard drillings are: 28, 32, and 36
holes for front and rear hubs while the Heavy-Duty rear hubs have
only 32, 36 holes available.
|
|
Chris
King 20mm ISO Disc Thru Axle Hub buy it for US$179.00
on aspirevelotech.com
As with all of their Precision Components, Chris King® wanted this 20mm Thru-Axle hub to the be best hub that you could possibly buy. Their design concept is simple but strict, and the engineers at Chris King® definitely delivered. The Chris King® 20mm hub has a one piece, super strong axle that can be adjusted while out on the bike with just a single wrench… you don’t even need to remove your wheel. Many other 20mm hubs make you adjust the hub bearings by clamping the fork legs together, and others have no adjustment at all. This Chris King® 20mm hub makes adjustment super easy with a common hex wrench.
Chris King® had to design an entirely new bearing for this hub, a bearing that’s bigger than anything else out there. They’re the toughest bearings possible and they secure the axle like no other 20mm hub. And the axle is special too… its high strength, 110mm one-piece
aluminium design includes a stainless steel axle biter end cap on each side for maximum grab onto your fork.
This hub is ISO disc standard compatible too. No disc adapters are needed to install most any modern brake system.
This Chris King® 20mm hub is very light, just 207 grams. If you want a hub that will build an excellent wheel, is strong and reliable, easy to adjust and looks great too, only the legendary quality of this Chris King® 20mm Thru-Axle hub will do.
|
|
Pro
Carbon road handlebar buy it for US$198.50
on aspirevelotech.com
Shimano 42 cm (center to center) 240 grams
Pro Carbon road stem buy it for US$87.50
on aspirevelotech.com
110 mm (clamp center to clamp center) 174 grams
Buy both for US$260.00!
 This
anatomically shaped handlebar is manufactured in the same exact
factory where many of the big names have their carbon components
made with the professional grade carbon fibre and a matching Pro
Carbon Stem. This particular
handlebar is the best overall design I've ever ridden with
the Pro in mind, the designers have taken their best ideas from
their best handlebars and put them all into this one handlebar. Most
important it is light (414 grams total) and stiff (but not harsh or
cold like aluminium). The bar tops are angled down 3° and
have a super comfortable ovalized shape. The top portion of the bar
is also 2 centimetres narrower than the drops so when you want to
be, you're tucked better for an aero advantage. The latest model now
includes under the bar cable holder bridges that support
Shimano, Campagnolo, or SRAM cabling systems. |
|
|
|
|
